goanywhere

Chemical Equipments , Potassium hydroxide IUPAC name   Potassium hydroxide Other names Caustic potash Potash lye Potassia Potassium hydrate Identifiers CAS number [1310-58-3] PubChem 6093213 EC number 215-181-3 UN number 1813 RTECS number TT2100000 ChemSpider ID 14113 Properties Molecular formula KOH Molar mass 56.1056 g/mol Appearance white solid, deliquescent Density 2.044 g/cm3 Melting point 420 C Boiling point 1327 C Solubility in water 110 g/100 mL (25 C) 178 g/100 mL (100 C) Solubility soluble in alcohol, glycerol insoluble in ether, liquid ammonia Acidity (pKa) 13.5 (0.1 M) Refractive index (nD) 1.409 Structure Crystal structure monoclinic Coordination geometry rhombohedral Hazards MSDS ICSC 0357 EU Index 019-002-00-8 EU classification Corrosive (C) Harmful (Xn) R-phrases R22, R35 S-phrases (S1/2), S26, S36/37/39, S45 NFPA 704 0 3 1   Flash point Non-flammable LD50 273 mg/kg Related compounds Other anions Potassium hydrosulfide Potassium amide Other cations Lithium hydroxide Sodium hydroxide Rubidium hydroxide Caesium hydroxide Related compounds Potassium oxide Except where noted otherwise, data are given for materials in their standard state (at 25 C, 100 kPa) Infobox references Potassium hydroxide is the inorganic compound with the formula KOH. Along with sodium hydroxide, this colourless solid is a prototypical "strong base". It has many industrial and niche applications. Most applications exploit its reactivity toward acids and its corrosive nature. In 2005, an estimated 700,000 to 800,000 tons were produced. Approximately 100 times more NaOH than KOH is produced annually. KOH is noteworthy as the precursor to most soft and liquid soaps as well as numerous potassium-containing chemicals. Contents 1 Properties and structure 1.1 Structure 1.2 Solubility and desiccating properties 1.3 Thermal stability 2 Reactions 2.1 As a base 2.2 As a nucleophile in organic chemistry 2.3 Reactions with inorganic compounds 3 Manufacture 4 Uses 4.1 Precursor to other potassium compounds 4.2 Manufacture of biodiesel 4.3 Manufacture of soft soaps 4.4 As an electrolyte 4.5 Niche applications 5 See also 6 References 7 External links // Properties and structure Potassium hydroxide is usually sold as translucent pellets, which will become tacky in air because KOH is hygroscopic. Consequently, KOH characteristically contains varying amounts of water (as well as carbonates, see below). Its dissolution in water is strongly exothermic, meaning the process gives off significant heat. Concentrated aqueous solutions are sometimes called potassium lyes. Structure At higher temperatures, solid KOH crystallizes in the NaCl motif. The OH group is either rapidly or randomly disordered so that the OH- group is effectively a spherical anion of radius 1.53 (between Cl- and F- in size). At room temperature the OH- groups are ordered and the environment about the K+ centers is distorted with K+---OH- distances ranging from 2.69 to 3.15 , depending on the orientation of the OH group. KOH forms a series of crystalline hydrates, namely the monohydrate KOHH2O, the dihydrate KOH2H2O, and the tetrahydrate KOH4H2O. Solubility and desiccating properties Approximately 121 g of KOH will dissolve in 100 mL of water at room temperature (compared with 100 g of NaOH in the same volume). Lower alcohols such as methanol, ethanol, and propanols are also excellent solvents. The solubility in ethanol is about 40 g KOH/100 mL. Because of its high affinity for water, KOH serves as a desiccant in the laboratory. It is often used to dry basic solvents, especially amines and pyridines: distillation of these basic liquids from a slurry of KOH yields the anhydrous reagent. Thermal stability Like NaOH, KOH exhibits high thermal stability. The gaseous species is dimeric. Even at high temperatures, dehydration does not occur. Because of its high stability and relatively low melting point, it is often melt-cast as pellets or rods, forms that have low surface area and convenient handling properties. Reactions As a base KOH is highly basic, forming strongly alkali solutions in water and other polar solvents. These solutions are capable of deprotonating many acids, even weak ones. In analytical chemistry, titratons using solutions of KOH are used to assay acids. As a nucleophile in organic chemistry KOH, like NaOH, serves as a source of OH-, a highly nucleophilic anion that attacks polar bonds in both inorganic and organic materials. In perhaps its most well-known reaction, aqueous KOH saponifies esters: KOH + RCO2R RCO2K + RH When R is a long chain, the product is called a potassium soap. This reaction is manifested by the reasy feel that KOH gives when touched fats on the skin are rapidly converted to soap and glycerol. Molten KOH is used to displace halides and other leaving groups. The reaction is especially useful for aromatic reagents to give the corresponding phenols. Reactions with inorganic compounds Complementary to its reactivity toward acids, KOH attacks anhydrides, defined in the broadest sense. Thus, SiO2 and CO2 are attacked by KOH to give the silicates and bicarbonate, respectively: KOH + CO2 KHCO3 Manufacture Historically KOH was made by boiling a solution of potassium carbonate (potash) with calcium hydroxide (slaked lime), leading to a metathesis reaction which caused calcium carbonate to precipitate, leaving potassium hydroxide in solution: Ca(OH)2 + K2CO3 CaCO3 + 2 KOH Filtering off the precipitated calcium carbonate and boiling down the solution gives potassium hydroxide ("calcinated or caustic potash"). This method was used potash extracted from wood ashes using slaked lime. It was the most important method of producing potassium hydroxide until the late 19th century, when it was largely replaced by the modern method of electrolysis of potassium chloride solutions, analogous to the method of manufacturing sodium hydroxide (see chloralkali process): 2 KCl + 2 H2O 2 KOH + Cl2 + H2 Hydrogen gas forms as a by-product on the cathode; concurrently, an anodic oxidation of the chloride ion takes place, forming chlorine gas as a byproduct. Separation of the anodic and cathodic spaces in the electrolysis cell is essential for this process. Uses See also: Sodium hydroxide KOH and NaOH can be used interchangeably for a number of applications, although in industry, NaOH is preferred because of its lower cost. Precursor to other potassium compounds Many radium salts are prepared by neutralization reactions involving KOH. The potassium salts of carbonate, cyanide, permanganate, phosphate, and various silicates are prepared by treating either the oxides or the acids with KOH. The high solubility of potassium phosphate is desirable in fertilizers. Manufacture of biodiesel Although more expensive than using sodium hydroxide, KOH works well in the manufacture of biodiesel by saponification of the fats in vegetable oil. Glycerin from potassium hydroxide-processed biodiesel is useful as an inexpensive food supplement for livestock, once the toxic methanol is removed. Manufacture of soft soaps The saponification of fats with KOH is used to prepare the corresponding "potassium soaps," which are softer than the more common sodium hydroxide-derived soaps. Because of their softness and greater solubility, potassium soaps require less water to liquefy, and can thus contain more cleaning agent than liquefied sodium soaps. As an electrolyte Aqueous potassium hydroxide is employed as the electrolyte in alkaline batteries based on nickel-cadmium and manganese dioxide-zinc. Potassium hydroxide is preferred over sodium hydroxide because its solutions are more conductive. Niche applications KOH attracts numerous specialized applications, which virtually all rely on its basic or degradative properties. KOH is widely used in the laboratory for the same purposes. In chemical synthesis, the selection of KOH vs. NaOH is guided by the solubility for the resulting salt. Its corrosive properties make it useful as an ingredient in cleaning and disinfection of resistant surfaces and materials. It is often the main active ingredient in chemical "cuticle removers." KOH is also widely used as a way to remove hair from animal hides, leaving the hides in a solution of KOH and water for a few days. See also Soda lime References ^ a b H. Schultz, G. Bauer, E. Schachl, F. Hagedorn, P. Schmittinger otassium Compounds in Ullmann Encyclopedia of Industrial Chemistry, 2005, Wiley-VCH, Weinheim. doi:10.1002/14356007.a22 039 ^ "Caustic Potash." Oxy.com Retrieved on January 24, 2008. ^ "Potassium Hydroxide." MSDS Retrieved on January 24 ^ Wells, A.F. (1984) Structural Inorganic Chemistry, Oxford: Clarendon Press. ISBN 0-19-855370-6. ^ Holleman, A. F.; Wiberg, E. "Inorganic Chemistry" Academic Press: San Diego, 2001. ISBN 0-12-352651-5. ^ W. W. Hartman. "p-Cresol". Org. Synth.; Coll. Vol. 1: 175.  ^ Rmpp Chemie-Lexikon, 9th Ed. (in german) ^ http://www.utahbiodieselsupply.com/chemicals.php#KOH ^...